ISOLUBRIC VG SERIES

Special and general purpose hydraulic oils based on high quality base oils. High ageing and wear resistance through specialised additive technology. High viscosity index (VI) gives good viscosity temperature performance.
Packaging: 20L/Pail & 200L/Drum
Warranty: 24 month

ISOLUBRIC high performance oils are specially intended for both fluid power transmission and lubrication of heavily loaded machine tool transmissions. Attention was paid especially at the concept stage to a high viscosity index. This range thus offers an extremely favorable viscosity-temperature relation for the precise functioning of hydraulic units.

ISOLUBRIC is a hydraulic oil that, according to its performance characteristics, corresponds to DIN 51 524 Part 2 (HLP), as well as meeting the requirements of DIN 51 517 Part 3 (CLP) as a transmission oil.

Excellent anti wear properties and a high pressures resistance thanks to EP/AW additives well selected, as well as a good ageing stability enable this product to reach the maximum FZG load 12 corresponding to DIN 51 354 part 1 and 2 (FZG A 8.3 /90).

Excellent demulsifying characteristics in the face of aqueous media (see Hernrich Hertz Institute Report).

Product Viscosity at 400C (cSt) Flash Point (oC Pour Point (oC)
ISOLUBRIC VG 10 10   -27
ISOLUBRIC VG 15 15 3.5 -30
ISOLUBRIC VG 22 22 4.4 -30
ISOLUBRIC VG 32 32 5.7 -27
ISOLUBRIC VG 46 46 6.9 -25
ISOLUBRIC VG 68 68 8.8 -20
ISOLUBRIC VG 100 100 12.1 -20
ISOLUBRIC VG 150 150 15.0 -20
ISOLUBRIC VG 220 220 19.0 -16

 

Typical Applications of PETROFER ISOLUBRIC VG SERIES Oils are used in all industry sectors by following ranges:

– Hydraulic Oil H

– Hydraulic Oil HL

– Hydraulic Oil HLP

– Hydraulic Oil HLP-D.

PETROFER GEARLUBRIC VG SERIES got many approvals from following machine manufacturers:

  • ALZMETALL GMBH
  • ALFING KESSLER
  • ARTHUR KLINK
  • BOSCH REXROTH
  • BUHLER
  • DMG MORI
  • EICKHOFF BERGBAUTECHNIK
  • FRECH
  • GROB
  • HATEBUR
  • HELLER
  • HEGENSCHEIDT MFD
  • LIEBHERR
  • LOESCHE INNOVATIVE ENGINEERING
  • NAGEL
  • PRAWEMA
  • SCHUTTE
  • WEINGARTNER MASCHINENBAU...
popup

LIÊN HỆ ĐẶT HÀNG

OTHER PRODUCTS

WAYLUBRIC VG is according to DIN51517 standard. The Waylubric range comprises raffinates which have a high level of resistance to ageing and extraordinarily good corrosion protection. The stick-slip effect is avoided by reason of their high capacity for absorbing pressure and their special adhesive additives.

Oxidation resistance, freedom from zinc and an extra-ordinary demulsifying Capacity distinguish our Waylubric oils and make them suitable for a wide area of application.
GEARLUBRIC series are composed of high fined-oils with good against oxidation. And the EP additives have the ability to hold the high pressure of gear-root and drive the moment.
Good anti-corrosion and viscosity-temperature properties makes the GEARLUBRIC series’ performance more perfect.
GEARLUBRIC series is according to DIN51517 standard. And GEARLUBRIC series have been applied in industry for serveral tens years.
Especially low viscosity specialty oils for lubricating high speed spindles in machining, grinding and textile applications. Ageing-resistant and corrosion protected.