DIE-LUBRIC 4060

Water-miscible die-face lubricant for die-casting of aluminum and magnesium.
Packaging: 20L/Pail & 200L/Drum
Warranty: 24 month

DIE-LUBRIC 4060 is a water-miscible die-face lubricant for die-casting of aluminum and magnesium, which is highly dilutable but nonetheless very effective.

DIE-LUBRIC 4060 has extraordinary good wetting properties also when the die temperatures are very high. The emulsions produce a very uniform coating of the die-face.

DIE-LUBRIC 4060 contains as release agents and lubricity additives organic materials of high thermal stability. Neither residue formation nor metal pick-up on the surface of the die occur.

DIE-LUBRIC 4060 does not contain harmful materials. It does not produce hazardous or irritating fumes. The air in the die-casting shop remains clear.

DIE-LUBRIC 4060 is used in a dilution-ratio of 1:130 up to 1:200. Extremely difficult castings, where thin cores or the die are partially over-heated, may require a higher concentration of up to 1:80.

DIE-LUBRIC 4060 is applied with standard spray equipment for water-miscible die-face lubricants either manually or automatically.

DIE-LUBRIC 4060 are widely used by European die-casters.
popup

LIÊN HỆ ĐẶT HÀNG

OTHER PRODUCTS

Water-miscible die-face lubricant for zinc alloys.
DIE-FORGENT WL 148 is a water-miscible heat forging, warm forging release agents for steel, aluminum alloy and non-ferrous metal alloy.
Non-graphited plunger lubricant for die-casting shops.
Finely granulated plunger lubricants.